You must know well how to change oil in your motorcar. It is of real importance that you change the oil of your motorcar every 3 months or 3000 miles. A regular maintenance of the car is necessary for its optimal performance.
There are certain steps that you should furnish in order to know how to change oil of your car. Like in the first place, you should have a minimal stock of a set of sockets, jack stands, and an oil-drying pan. It is important that you run the engine for 10 minutes at a stretch before clearing the existing oil out of it. This is because; warm oil is known to be draining faster than cold oil.
Next after having run the engine for 10 minutes, place the car on a flat-leveled surface, and stop the engine after engaging the parking brake. Then open the hood of the car to put oil inside the engine. However, before that there are a number of steps that you should earnestly follow in doing with how to change oil of the car.
The first step of how to change oil in the car, is locating the oil drain plug of the car, near the front part of the car. It is advised to consult the car manual while locating for the exact thing. After that, it is required to place the oil-draining pan under the plug, of course after having removed the plug carefully. Let the hot oil rush out from there and if necessary alter the position of the pan in order to catch the dripping oil left behind.
Eventually after reinstalling the plug, it is time to search for the existing oil filter. On locating it, position the pan to get the dripping oil fall on the pan placed underneath the filter. Then slowly remove the old oil filter and replace it with the new one. In all the above cases, the efficiency and expertise of your hands in screwing, tightening and unfastening of the nuts and bolts of the various parts of the car is very important to learn about “how to change oil”.
The next step in the process of “how to change oil” is to put oil inside the engine of the car. For that you require to first locate and then remove the oil filter on top of the engine. Then position a funnel on top of the opening and pour new oil into it.
After pouring in enough oil, it is time to run the engine, and check with the dipstick if more oil is required to be filled in. Then, after having done with the process, wipe the surrounding oily region clean and tighten hard the plugs around. On being done with the entire course of “how to change oil”, start your car in spark and shine.
